The FlowExpertPro includes a database with commonly used fluid and their physical properties. The user can select these fluids to size the flowmeters.
č To select a fluid from the database:
1. Click Select to specify the fluid
2. On the Fluid Selection page, highlight a fluid in the selection box.
3. Enter the fluid's normal temperature and normal pressure
4. If necessary, edit the fluid's density, viscosity, molecular weight, compressibility, and specific gravity.
5. If available, click Material Selection Guide to review the recommendations for the flow meter's construction. Click Close to return to the Fluid Selection page.
6. Click Back to Process Data with Selected Fluid and Values to save the data for the flowmeter.
7. Enter process data for your application:
- minimum, normal, and maximum flow rate
- minimum, and maximum pressure
- minimum, and maximum temperature.
NOTE: if you change the normal pressure and/or temperature on the Process Data tab, the application clears the density and viscosity.
8. If necessary, edit density and viscosity.
9. Open the next tab. The Process Data is saved.